A Complete Guide to Make Cardboard Bath Bomb Packaging for Your Business

  • 55

When it comes to making beauty products, you can always improvise on your methods. However, for this particular project, the standard way to manufacture bath bombs entails using a mold or press. You place small amounts of raw material in each cavity, insert them under pressure and turn out perfectly packed pieces every time. This process requires great skill because if you apply too much force or don’t remove the mixture right, away-it will not come out properly later. The following are some other bases that will help you make cardboard bath bomb box packaging for your business:

1) Decide the Thickness of the Material:

When it comes to cardboard, there are different types of thickness that you can choose from. The most common is the regular or standard thickness, which is great for packaging because it’s not too thick or too thin. If you’re looking for a sturdier option, go for the heavyweight cardboard-this will be more durable and can hold more weight. Finally, if you want your product to have a premium feel, then you can choose to use corrugated cardboard.

2) Cut the Board to Size:

The next step is to cut the board to size. You’ll need two pieces of cardboard-one for the top and one for the bottom. The dimensions will on the size of your bath bombs, so you’ll have to measure accordingly.

If you are opting for corrugated cardboard, then go for the type that has a single fold. You can do so by simply laying it flat on your work surface and folding one side at a time. The result will be two pieces of corrugated cardboard which are each half the width of the original piece

3) Fold-Over Hems:

The next step is to fold over the hems around all four sides of both pieces of cardboard, which you’ve cut out in previous steps. To make things easier, tape down each side with masking tape before folding them over. Make sure that these hems are nice and tight, or else your bath bombs will not fit properly inside- and you don’t want this.

4) Prepare the Box:

The final step is to create a box with your two pieces of corrugated cardboard by bringing each one together in an L formation, as shown in the image below. Simply tape them together and make sure they’re very sturdy because you’ll probably be carrying around quite a few bath bombs with it later on!

You can also keep things nice and clean looking by adding some writing on the outside of your box with a marker or even personalizing it with cute stickers like these:

5) Paste the Labels:

Next, you can tape some labels on the front of your box, which will make them feel more like a gift and not just a random product. Make special labels for each type of bath bomb you’re selling, and make sure to include the ingredients and any instructions customers may need.

6) Cut a Hole in the Top:

Now it’s time to cut a hole in the top of your box so that people can easily grab the bath bombs they want. Be sure to use a sharp knife or scissors and make the hole big enough for people to get their hands in there.

You can also put a little ribbon around the hole to make it look pretty and give it that extra touch. There you have it! Your very own cardboard bath bomb packaging will make your business look professional and help you sell more products. Remember to personalize the labels, add a hole in the top, and tie a ribbon around it for a final touch.

7) Add a Bow:

A bow is a good way to make your box look nicer. It helps cover up any rough edges from when you cut the hole in the top. Plus, it’s a cheap and easy way to make your packaging look nicer!

You can make your bath bombs look even nicer by putting them in gift boxes. This will make them more presentable and people will like it. Remember, do not put the bath bombs close together or they might break each other. All that is needed for this packaging is a hole punch, some ribbon, a ruler, a box cutter/utility knife, and some tape.

8) Fill It:

Finally, fill up your new bath bomb packaging with all of your favorite products, and you’ll be ready to go! Keep in mind how many bombs fit comfortably inside so that you can adjust accordingly later on if necessary. Bath bombs should be put in a container to keep them from bouncing around during transportation.

This can cause cracks or breakage to happen. If there is not enough space, add another bath bomb. The important thing is that each bomb fits snugly into its designated area, so it doesn’t move around.

9) Final Polish:

Finally, you have your finished product! When you make a bath bomb, the only thing left to do is to look at the box. Make sure that everything looks good and then seal it up with tape. Then label your box with information about your business. It is now ready to be delivered!

There you have it- a complete guide on how to make custom cardboard boxes for your business. As long as you are careful about it and take your time, this process is not hard. You will have a more professional-looking product. So, get crafting!

Conclusion

Concluding, Cardboard packaging is cheaper to make but good. You can make it cute and attractive too. It helps you save money and gets attention from customers because it has a fun, creative twist on bath bomb product branding. If you have any questions or concerns about these ideas, feel free to contact us on our website or social media.

I hope now you are aware of how to make cardboard bath bomb packaging for your business. If you have any queries regarding this topic, comment below in the box. Our team will help you out as soon as possible. Thank You!

When it comes to making beauty products, you can always improvise on your methods. However, for this particular project, the standard way to manufacture bath bombs entails using a mold or press. You place small amounts of raw material in each cavity, insert them under pressure and turn out perfectly packed pieces every time. This…

When it comes to making beauty products, you can always improvise on your methods. However, for this particular project, the standard way to manufacture bath bombs entails using a mold or press. You place small amounts of raw material in each cavity, insert them under pressure and turn out perfectly packed pieces every time. This…

Leave a Reply

Your email address will not be published. Required fields are marked *